| Program Menus |
| |
|
|
|
|
Menus
In order to use the SETUP, DELETE, and MACRO menus you will first need to press and hold the desired menu button for 3 seconds.
This activates a password protection sequence to prevent accidentally entering a programmable menu .
Figure 6: Confirm Menu Entry
by Pressing Numbers
Four numbers will appear which will need to be pressed before the desired menu will appear. This is simply to make sure you meant to enter the menu. You can press the numbers in any order you like and they will vanish when pressed. When all of the numbers have vanished, the desired menu will appear.
Ch.
2
Page
| Channel lists |
3.Press the UP and DOWN arrows to rotate through the channels currently assigned.
4.Press OK to delete a particular channel.
5.Repeat above steps to delete other channels.
6.Press OK when finished.
Using Quick Channel Lists
Press the Quick Channel button you wish to use. (It will begin to flash.) Now use the Channel Up and Channel Down buttons to scroll through all channels in this classification. When finished, press the Channel button again to return to normal operation.
Transmitting System Setup
The
•MCU Program
•Flash Memory Data
•
To perform a data transfer you will need to purchase a link cable. Please see the manual that accompanies the cable for more information on how to do the transfer. For more information on the link cable please see Appendix B – Accessories.
Ch.
6
Page
12 | 49 |