Setup and Connections
Connecting to a TV or monitor with SCART or Component connectors.
Important Notes on SCART and RGB format:
■Your DVD is equipped with a SCART connec- tor for direct connection to the TV.
■The SCART connector provides the video signal as well as audio (stereo L/R) signals.
■The SCART connector for the TV provides the composite video signal or the direct RGB signal, delivering the best video performance possible, selectable in the Setup menu.
To view RGB video on your TV, the RGB compatible SCART connector on the TV must be used and the DVD´s TV SCART connector must be set to ”RGB”.
Note that with RGB video the color intensity cannot be adjusted with most TVs.
■When the RGB video signal is used, DVD´s recorded with the NTSC format (with regional code 0 or 2) can be viewed even on non- NTSC compatible TVs.
Component Video Connection
If the video display has component video inputs, connect the Component Video Outputs on the DVD to the corresponding input jacks on your television. If you are using a progressive scan television or projector, you must also change the Scan Type in the DVD player's Video
TV or Monitor
DVD
To SCART connector
To power outlet
To Component(AC 230V/50 Hz) connectors
To optical or coaxial input of Dolby Digital/ DTS Decoder/ Amplifier/Receiver