System Setup
If the password is correct, the following display will appear in the menu:
The current parental control level will be high- lighted. Use the ARROW ( KL) buttons to select the level of restricted access you want. REMEMBER: the lower the number, the higher the restriction. When the level you prefer is high- lighted, press ENTER to activate it.
Change Password
After the password was entered or the parental control level was set, use the ARROW (L) but- ton to make sure the cursor is pointing to ”NEW PASSWORD and press ENTER.” Enter the new password. The display will change to ”CONFIRM”, requesting that you repeat the new password to confirm that it is correct. If you have correctly entered the new password twice, the display will confirm the change by ”OK”. Press Arrow (M ) button to exit the level/password
Display Language
When you enter the Player menu, Display LANGUAGE will be highlighted. If not, use the ARROW (KL) buttons to select it, then press ARROW ( N) or ENTER to access the Display LANGUAGE
Select the language you prefer for the player's onscreen displays and short messages. This selec- tion does not affect the front panel display.
Menu Language
Some discs include several menus made with dif- ferent languages. Select MENU LANGUAGE in the Player Setup Menu, then press ARROW (N) or ENTER to access the MENU LANGUAGE sub- menu. The right column now shows the current Menu Language setting (highlighted) and the options.
Select the language you prefer for disc menus. If a disc does not support the selected language, the original default language will automatically be chosen.
Select another Menu Language Other languages for the DVD menu can be selected in the same way as described for the "Audio Language" on page 18 by selecting OTHER and entering a four digit code.
Subtitle Language
Select SUBTITLE LANGUAGE in the Player Setup Menu, then press ARROW (N) or ENTER to access the SUBTITLE LANGUAGE
With this setting you define your preferred subtitle language (if the disc contains different subtitles). Choosing a subtitle language with the SUBTITLE button on the remote control (see page 8) will change this setting only temporarily.
This setting can turn subtitles on or off. If set to OFF, subtitles will not be displayed automatically. The SUBTITLE button on the remote control can be used to select and change subtitles during playback.
Select another Subtitle Language
Other languages for the subtitle can be selected in the same way as described for the "Audio Language" on page 18 by selecting OTHER and entering a four digit code.
Status Bar Time Out
Select STATUS BAR TIMEOUT in the Player Setup Menu, then press ARROW ( N) or ENTER to access the STATUS BAR TIMEOUT
When set to OFF, the Status Bar will remain onscreen when selected, until STATUS or CLEAR is pressed on the remote control. If set to 5 or 20 seconds, the Status Bar will disappear after that number of seconds. However, during CD playback, the Status Bar will always remain
Panel Dimmer
Select PANEL DIM in the Player Setup Menu, then press ARROW ( N) or ENTER to access the PANEL DIM
If you wish the front panel display to be lit whenever DVD player is on, select Off.
If you wish the display to dim in normal play mode and to light up for 5 or 20 seconds only when a button has been pressed on the front or remote, select 5 seconds or 20 seconds as the timeout.
The 5 or 20 second timeout interacts with the remote Dimmer button in the following way: If display lighting has been turned off with the Dimmer button, the PANEL DIM will only turn on the green LED's, not the full display. If display lighting has been set to half brightness with the Dimmer button, the display will light up to this level and the LED's to full level.
You´ve completed the setup process for your DVD 21 and are about to experience the finest in music and home entertainment. Enjoy!
Press SETUP or PLAY on the remote control to exit the