Programmed Play with CD
Program Play
Programmed play allows you to select any track, from a CD for playback in a specific order. This type of programming is particularly useful for parties or other situations where you want continuous playback of specific selections for a long period of time. To program the disc in the DVD 21 for playback, follow these steps:
Program Edit
1.In Stop or Resume mode, press PROG on the remote, Program Edit Display appears.
■If there is no programmed Track on the playlist, the above Display appears when you press PROGRAM. The number below the TRACK icon indicates the number of tracks on the disc.
2.Select specific track by pressing ARROW (K or L). Then press ENTER once, ADD will be highlighted automatically. You can also select a track directly by entering its number with NUMBER (0~9) keys. Then press ENTER to add selected track to the playlist.
3.You can select maximum 50 tracks by repeat- ing step 2.
4.When you have completed program edit, select PLAY icon and then press ENTER on the remote or press PLAY on the remote to start program play. If you do not wish to play the program immediately, select DONE, then press ENTER followed by PLAY to resume normal playback.
■To listen to a previously edited program during normal disc playback, press PROG. The pro- gram will play and the PROG indicator in the front display will light.
Delete tracks
1.To delete any programmed track while the Program Edit Display is on the screen, press ARROW ( N or M) on the remote to move the cursor (highlight) to the Playlist.
2.Press ARROW (K or L) to select the track to be deleted. When it is selected press ENTER, the selected track will be deleted. Note that the next value in the list will replace the delet- ed one and will be selected automatically.
■The program can be deleted completely by moving the cursor to the top of the playlist, and pressing ENTER for each track value pro- grammed or by turning the unit off completely (by the Main Power On/Off button) or opening the tray (see chapter ”Cancel Program Play” below)
Insert Tracks
Inserting tracks is possible only if tracks are already programmed on the playlist and will change the order of playback.
1.Press PROG on the remote to insert a track, Program Edit Display appears.
2.Move cursor to Playlist and press ARROW (KorL) on the remote to select location where you want to insert a track. It will be inserted above the location selected.
3.Move cursor to TRACK icon and select and add the track to be inserted as described in the chapter Program Edit above. The location where any new selections will be inserted remains highlighted by a grey background.
■When you finish adding values to Playlist and want to return to normal play mode, select DONE and press ENTER on the remote.
Cancel Program Play
Program Play will be canceled:
1.When you open the tray; this will delete the complete program.
2.When you turn Power off completely (by the Main Power On/Off button), this also will delete the complete program.
3.When you press STOP twice from the play mode. Then the PROG indicator will disappear from display and the player will stop and return to normal mode, but the program will remain in memory and can be recalled by pressing PROGRAM.
4.To cancel Program play while a program is playing and return to normal play, press PROG. The PROG indicator in the front display will turn off and the unit will turn to normal play mode.
Checking the Program without Screen
To check the contents of a Playlist using the Front Panel Information Display only rather than the
1.Activate the program play mode, if not so already, so that the PROG indicator in the front panel display will light. Then press STOP once (Resume mode).
2.Press the CHECK Button. The first track number programmed will be displayed.
3.Press the CHECK button again to step through each of the programmed tracks. The Program location Number will appear on the far right side of the front Display and the track number on the left side.
4.Press PLAY to delete the