CD Playback
Compatibility of Discs
Before you load a disc, make sure that it is compatible with the player.
Note that the following discs CANNOT be used with this player.
■Laserdisc
■Pure Data Disc without MP3
■MiniDisc
To Load and Play an Audio CD
Make sure that you have properly connected the DVD player:
1.Press OPEN/CLOSE on the front of the DVD player or on the remote, the disc tray opens.
2.Place a disc gently into the tray with the disc’s label facing up.
3.Press PLAY to close the disc tray. The DVD player reads the disc’s table of contents and the disc starts to play.
4.To search forward or reverse through the track, press SEARCH (forward/reverse) on the remote. To pause play, press PAUSE on the remote or on the front panel. To release the pause, press PAUSE or PLAY on remote or on front panel again.
5.Press STOP to stop playback.
■All playback basics and transport functions are described in detail on page 15.
Audio CD Playback Features
When playing audio CD’s, your DVD player has the same features as a CD player, including track skip, repeat play and programmed playback. The
| TRACK |
| TIME |
|
|
| I |
| I |
|
|
|
|
|
|
|
|
| TRACK | MARK | V |
| |
| 1 | OFF | 00:00:17 | 0 |
|
|
| I |
|
|
|
|
| BOOKMARK |
|
|
|
|
|
|
|
|
|
Track: The number shown indicates the number of the track that is currently playing.
Bookmarks: Highlight this area and press enter to set or go to bookmarked locations on a disc.
Time Display Type: This shows the type of time
indication being shown: Time Elapsed or Remaining for the Current Track, Total Elapsed for the Disc, or Total Remaining for the Disc.
Using the Status Bar
As soon as a CD is played the Status Bar will appear automatically. To delete it from screen, press STATUS or CLEAR on the remote, to re- access it, while the CD is playing, press STATUS again. In the Display some of the playback features are illustrated with an icon. To access a feature, press the appropriate ARROW (M or N) on the remote to highlight the icon. Each feature is described in the following page.
Note:
To see the Status Bar, you must turn on your TV and tune it to the appropriate Video Input Channel.
Information Menus
With CDs you have the same access to Info Menus about the disc loaded (like disc type or Audio resolution) or the player settings as with DVDs, see page 23.
However with CD you must press the INFO button during Stop or Resume mode, not during Play.