Hanns.G HG281 user manual Connecting to a A/V Device

User’s Manual

CONNECTING TO A A/V DEVICE:

Connect A/V devices via the D-sub and Audio Line in connectors at the back of the monitor.

1.Connect one end of the D-Sub cable to the back of the monitor and connect the other end to the D-sub to YPbPr adapter cable.

2.Connect the Y (green) connector on the D-sub to YPbPr adapter cable to the Y output connector on the A/V device.

3.Connect the Pb (blue) connector on the D-sub to YPbPr adapter cable to the Pb/Cb output connector on the A/V device.

4.Connect the Pr (red) connector on the D-sub to YPbPr adapter cable to the Pr/Cr output on the A/V device.

5.Connect the 3.5mm mini jack to R/L adapter cable to the audio output connector of the A/V device and the other end to the audio input connector at the back of the monitor.

6.Turn on your monitor and A/V device.

Figure 3: Connecting A/V Devices

10