Control Panel Button Functions, Menu / Enter

User’s Manual

CONTROL PANEL BUTTON FUNCTIONS

•Power Button:

Press this button to switch ON/OFF of monitor’s power.

•Power Indicator:

Blue — Power On mode.

Orange — Power Saving mode.

•MENU / ENTER:

1.Activates the OSD menu or confirms adjustments to settings.

2.Exit OSD volume display when in volume OSD status.

•Volume ▲/▼:

1.Activates the volume control when the OSD is OFF.

2.Navigate through adjustment icons when OSD is ON or adjust a function when function is activated.

•Auto Adjust button: (for D-sub only)

When OSD menu is in off status, press and hold this button for more than two seconds to activate the Auto Adjustment function.

(The Auto Adjustment function is used to optimized the H-Position, V-Position, Clock and Phase.)

NOTES:

•Do not install the monitor in a location near heat sources such as radiators or air dusts, or in a place subject to direct sunlight, or excessive dust or mechanical vibration or shock.

•Save the original shipping box and packing materials, as they will come in handy if you ever have to ship your monitor.

•For maximum protection, repackage your monitor as it was originally packed at the factory.

•To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety precaution, always unplug the monitor before cleaning it.

•Function Key Lock:

Press the ▼「Volume -」, ▲「Volume +」 and the 「Menu」 buttons simultaneously to enable the Function Key Lock. When the Function Key Lock is enabled, only the Power button is active. Press the ▼「Volume -」, ▲「Volume +」 and the 「Menu」 buttons simultaneously again to unlock the function keys.