Q-See QSTD2408, QSTD2416, QSTD2404 user manual Backup & Viewing, At DVR location

QSTD2400 Series DVR User’s Manual

3.5 Backup & Viewing

This unit supports backup to built-in SATA DVD Writer (optional equipment), or to USB Flash drive, through the USB port on the front panel. Users can also make backup by IE browser via internet, refer to 6.3.2 Remote Backup.

Taking USB flash backup as an example, Press right mouse button to show the control bar, refer to Fig 4.1 Control Bar.

At DVR location:

STEP1 Enter Backup mode, see Fig 3.18 Backup Setup

Fig 3.18 Backup Setup

STEP2 Choose the channel, and set the start and end time. Click Date button to change the date.

STEP3 Enable “Attach record player,” it will save a special player along with the backup to play it. With this player, users can make time searches and event searches when checking the backup.

STEP4 Click OK button. A window will appear as shown in Fig 3.19 Backup Information.

Fig 3.19 Backup Information

Notice: If users install built-in DVD writer and USB device, it will show USB device first by default. It will show CD-ROM even though users install DVD writer

STEP5 Press OK button. It will begin to write video from HDD inside DVR to backup device, and show the process as shown below.

21