Q-See QSTD2404, QSTD2416, QSTD2408 user manual Q10 How do I input password and digital numbers?

QSTD2400 Series DVR User’s Manual

Q9: Why doesn’t the mouse work when inserted into the front USB jack?

The front USB jack is only for backup to flash drive, and USB DVD writer, and does not support USB mouse. Please use the USB jack on the rear panel if using a mouse to operate the system.

Q10: How do I input password and digital numbers?

The method to input password and digital numbers is to click the box behind password or items where you need to input numbers, and then the small keyboard will appear. Please select number or letter to input (the default password is 123456), or you can use the digital keys on the front panel, or the digital keys on the remote control.

Q11: How do I upgrade the system when new functions are added or the firmware is revised?

After getting the upgraded firmware from Q-See, please copy it into a flash drive, and then select “upgrade” in the menu. When upgrading the firmware, please use the following method: first insert flash drive into the DVR, and then input “adwsws” in the password of system login and the system will upgrade the firmware from the flash drive automatically. After it finishes, please restart the DVR to activate changes.

Notice: Do not power off in the system upgrading process! Otherwise, it may damage the firmware and prevent the DVR from starting.

Q12: When I installed a hard drive used in another DVR of the same model it

was identified as a new hard drive why is this? And why must I format it

again?

When the DVR only uses one hard drive, the hard drive removed from another DVR of the same model can normally work without re-formatting. When you add another hard drive, it will identify the hard drive as a new one and inquire whether to format even if this hard drive was used in another same type DVR before. In this case, it can be used normally after being formatted according to the guide; if two or more hard drives used in different DVRs, when used in another DVR of the same type, they will be identified as two or more new hard drives, and all of them need to be formatted. If you use drives removed from different DVRs you will lose the data that is on them when they are formatted.

61