Q-See QSTD2408, QSTD2416, QSTD2404 user manual

Digital Video Recorder User Manual

Enable all the sub options under “ActiveX controls and plug-ins”

③

Then click ok to finish setup.

④b. Anti-virus programs could also block the ActiveX control, If you still have a problem try closing them. Other plug-ins could also block it.

c. If you get a error message that says the program cannot load because the publisher is unknown or the program is unsigned, go to internet explorer, tools, internet options, advanced, scroll down to security, and select the options to Allow software to run or install even if the signature is invalid, and Allow Active Content to Run Files on My Computer.

Q8: When the DVR starts, it displays “please wait…”all the time, how do I get past that?

Check the hard drive cable and data cable to make sure they are well connected.

If still not working, please unplug them and then try re-plugging them;

It may forced to stop because the hard drive has a disabled track which causes the system to keep checking because it cannot skip over the track.

Try another hard drive or reformat the current one.

60