| Error! Use the Home tab to apply |
|
| |||
|
| 1 to the text that you want to |
|
| ||
| appear here. Error! Use the Home |
|
| |||
| tab to apply |
| 1 to the text that |
|
| |
| you want to appear here. |
| SuperDVR & QSDT8PCRC | |||
| 标题 | • |
| Red light: Sensor Alarm Record State |
| |
| • |
| Blue light: Video Loss State |
| ||
| When the indicator light color turns into red | in row two, it means there is | ||||
| an alarm output. | User Manual | ||||
|
|
| 标题 |
|
| |
4.3.4 Manual Record Mode
Manual Record mode is the most commonly used recording mode. If a special event occurs, users can select this recording mode and record immediately.
NOTICE: You can select a high frame rate for a short time manual recording, while selecting a low frame rate for long time Scheduled Record.
4.3.5 Sensor Alarm Record Mode
Users can use sensors to trigger sensor alarm recording on relative channels.
At that time, the record status indicator light will turn red
.
4.3.6 Motion Detection Record Mode
This will enable the system to detect image changes and begin to record by activating motion detection and motion alarm recording. For instance, somebody opens the door, and the system detects image changes from the camera and begins to record, then users can play back the recorded file and find out who opened the door. When there is no movement, the system will not record which saves system resources, and makes it easier to find recorded events. The indicator light color in the record status panel will be
yellow
.
NOTICE: Users need to setup parameters in three places to enable motion detection recording.
•Select ‘Motion Detection’ for desired channels in ‘Basic Configuration’.
•Configure the motion detection areas for desired channels in ‘Motion Detection Configuration’.
•Configure working schedule for desired channels in ‘Schedule Configuration’.
20