Q-See QSD6204 manual Motion Detector Setup

Page 22

In this example, Channel 1 has sensors installed, Open and Close, respectively.

MOTION DETECTOR SETUP

This indicates the sub menu for setting up the software motion detection without any external sensor devices.

 

In this example, Channel 1 has Motion Detection enabled.

MOTION

The image below shows the Motion Detection Area setup. As you

SENSOR

see in the example below there are 3 shaded regions. Each region

RECORDING

represents different levels of motion sensitivity required to activate

 

sensor recording.

Adjust the sensitivity by first selecting the specific region in the view you would like to set. Then press ‘STOP’ button to adjust the sensitivity.

A blinking block (cursor) shows the particular setting sensitivity for that block. The Level 0 setting means the block area is disabled. Level 3 is the highest level of sensitivity. By pushing the “SELECT” button you can choose the sensitivity of the blinking block.

-19-

Image 22
Contents Page Table of Contents General Safety Introduction to the Digital Video Recorder DVRUnit Description MENU/ESCAPE PauseSELECT/EDIT Video OUT AlarmAC-DC Power Adapter Jack SensorGetting Started Hardware Installation Connecting DVR to Your TV SetPage For cameras that have a built-in microphone Sensor Installation Alarm Installation LAN-DVR Connection Power Connection DVR Menu Main menuCamera Setup Record Setup Select Cameras For RecordingNtsc Frames PER Second Record Frame RateVideo Quality Record Schedule SENSOR-RECORDHardware Sensor Setup Sensor SetupAlarm on Time Motion Sensor Recording Sensored Record TimeMotion Detector Setup MotionHard Drive Setup Hard Drive InformationDrive Hard Drive FormatHard FormatMiscellaneous Setup Password Change ·6-DIGIT Password ·DEFAULT Password Setting 111111Hidden Channel Page PTZ Setup HUE SAT Password Control BR1 (.CON)Network Setup ·PASSWORD ControlNetwork Setup Accessing the DVR over a network Accessing the DVR from a remote computer Network Setup User Setup Video Backup Video BackupReset Menu Restore Factory Default SettingsRecord Playback Control Record ControlRecording by Camera Playback ControlPlayback Control Single Record ModeView Control MULTI-SCREEN ViewUSB Programming optional USB Programming InstallProgram Interface Page Page Can’t turn on the DVR Trouble Shooting GuideWhat kind of camera should I buy for this DVR? See nothing but a blue screen after I turn on the DVRWhy do I need a password? Forgot my password. What should I do?ADPCM2 Codec AppendixNTSC, PAL MPEG4Ntsc PALSee Product Warranty Postal code