Q-See QSD6204 manual Pause, Menu/Escape, Select/Edit

(6)REW

To play the recorded video backward, press the “REW” button.

There are 6 modes of REW, 1~6.To change the reverse playback speed level, press the “REW” button again.

(7) PAUSE

To pause the video playback, press the “PAUSE” button. Then the video display will be stopped.

To continue playback, push the play “PLAY “ button or “PAUSE” button again to resume the previous mode.

(9) MENU/ESCAPE

To display the menu options, press the “MENU” button. Also used to Escape from current screen to previous screen

(10) UP (c) /DOWN (d) /RIGHT (f) /LEFT (e)

To change a menu field or change the DVR configuration values, use the UP, DOWN, LEFT, RIGHT buttons.

(11) SELECT/EDIT

This button is used to change the setup value.

(12) LED Light

There are LED lights located on the front panel (some models on the side panel).When the LED light is ON, it indicates the following conditions:

(a)Red LED-Hard Drive is currently recording video.

(b)Green LED-Power is on.

(13) Power Button

Press Power button to shut down DVR

(14) PTZ Button

Activates buttons for Pan-Tilt-Zoom camera control

-3-