Q-See QSD6204 manual Network Setup User Setup

Page 34

Static verses dynamic addresses: You can access the DVR through a static or dynamic IP address, however a dynamic address can change from time to time. How often depends on your service provider. We suggest www.Dyndns.org or www.no-ip.com domain name service. If you register your domain name for the DVR, you can use this service to connect to your DVR without the need for a static or public IP address. You do need to leave a computer attached to the router and ON to be able to use this service, but it could help avoid the higher cost of having a static address.

NETWORK

SETUP

-USER SETUP

When a user connects to the DVR via the Internet, Internet Explorer will prompt the user to enter a username and password. There are two kinds of user, ADMIN and USER.

The default value for username and password of “USER” is blank, Nothing. This allows the user to connect without username or password.

However, in order to control the DVR, the user must login as “ADMIN ”, and at that time must type the username and Password set by this menu.

-31-

Image 34

Contents Page Table of Contents General Safety Introduction to the Digital Video Recorder DVRUnit Description MENU/ESCAPE PauseSELECT/EDIT Video OUT AlarmAC-DC Power Adapter Jack SensorGetting Started Hardware Installation Connecting DVR to Your TV SetPage For cameras that have a built-in microphone Sensor Installation Alarm Installation LAN-DVR Connection Power Connection DVR Menu Main menuCamera Setup Record Setup Select Cameras For RecordingNtsc Frames PER Second Record Frame RateVideo Quality Record Schedule SENSOR-RECORDHardware Sensor Setup Sensor SetupAlarm on Time Motion Sensor Recording Sensored Record TimeMotion Detector Setup MotionHard Drive Setup Hard Drive InformationDrive Hard Drive FormatHard FormatMiscellaneous Setup Password Change ·6-DIGIT Password ·DEFAULT Password Setting 111111Hidden Channel Page PTZ Setup HUE SAT Password Control BR1 （.CON）Network Setup ·PASSWORD ControlNetwork Setup Accessing the DVR over a network Accessing the DVR from a remote computer Network Setup User Setup Video Backup Video BackupReset Menu Restore Factory Default SettingsRecord Playback Control Record ControlRecording by Camera Playback ControlPlayback Control Single Record ModeView Control MULTI-SCREEN ViewUSB Programming optional USB Programming InstallProgram Interface Page Page Can’t turn on the DVR Trouble Shooting GuideWhat kind of camera should I buy for this DVR? See nothing but a blue screen after I turn on the DVRWhy do I need a password? Forgot my password. What should I do?ADPCM2 Codec AppendixNTSC, PAL MPEG4Ntsc PALSee Product Warranty Postal code