Operation
can be used as user account or password. Press 「SEL」to input value, and move the prompt to the “Enter” option press 「SEL」to confirm.
Use CH1 for up, CH2 for down, CH3 for left, CH4 for right, Press “Shift” for change characters. [Level]
Move the cursor to change the highlighted option to Level, and then press [SEL] to adjust user level (operator/guest).
6.5.3 Password Setup
The default password is 111111. All numbers, letters and signs in the pane can be used in passwords. Press 「SEL」to input value, and move the prompt to the option of “Enter”, press 「SEL」 to input current password.
Button function on the front panel or remote control:
Use CH1 for up, CH2 for down, CH3 for left, CH4 for right.
Use the same operation procedure to input new password and confirm password. When password is changed successfully, user will see the below message:
When password change has failed, user will see the below message:
6.5.4 Clear Account Info
If you choose ON, the account information will be cleared when you logout of the system. If
18