Q-See QSD32824-250 user manual Camera Connection, Mouse Connection

Page 9

Operation Manual-4CH Duplex DVR

Connect “VIDEO IN” of the monitor to “VIDEO OUT” of the DVR system using the BNC to RCA cable that comes with the DVR.

5.3 Camera Connection

Connect the included video cables to the “VIDEO IN” of your DVR and “VIDEO OUT” of the camera with video cable and plug in the camera’s power adapter to the power feed of the video cable near the DVR.

“VIDEO OUT” on CAMERA

“VIDEO IN” on DVR

5.4 Mouse Connection

If you use a PS/2 mouse connect it to the port below on the system. A PS/2 Mouse must be connected to DVR before startup system. You can also use a USB mouse with a PS/2 Adapter, or attached to the USB port.

7

Image 9

Contents QSD32824-250 User’s Manual Table of Contents 10.1 Introduction DVR FeaturesPhysical Unit Front PanelRear Panel PS/2 Mouse Port Remote Control⒀ UP / Down Getting StartedHardware Setup Hard Drive InstallationMonitor Connection Mouse Connection Camera ConnectionDVR Power Connection SetupMouse Control Camera DVR Front Panel or Remote ControlRecord Framerate RecordRecord Quality Buzzer Duration AlarmUsing Mouse button Using keypad or remote control buttonScreen SystemMouse function is below Overwrite Enabled Hard Drive SetupAccount/Password Account SetupPassword Setup Button function on the front panel or remote controlClear Account Info Keypad Tone Time SetEvent List Firmware Upgrade LanguageLogout Exit Playback with Time Search FunctionKeypad Control Mouse ControlBackup via USB Flash Drive Installing File Player Recording LengthPlaying Backed UP Video Files on PC Button Functions Program InterfaceClose the window Page Capture Page 11.1 QSD32824 4CH DVR series compatible USB Flash Drives Appendix4CH DVR SpecificationsDVR Accessories included See Product Warranty Customer Information Card