Operation
[Input: AC
●PS/2 MOUSE PORT
Use this port for PS/2 mouse connection. If you have USB port mouse, use USB - PS/2 adapter to connect with this port.
●Fan
3.3 Remote Control
The buttons on the DVR remote control unit operates the system’s basic functions, such as recording, playback,
to “6. SETUP”.
⑴CH1↑
Use this button for full screen display for channel 1 on the monitor or move the cursor up.
⑵CH2↓
Use this button for full screen display for channel 2 on the monitor or move the cursor down.
⑶CH3←
Use this button for full screen display for channel 3 on the monitor or move the cursor left.
Also user can press this button to reduce value when adjusting
parameters.
⑷CH4→
Use this button for full screen display for channel 4 on the monitor or move the cursor to the right.
Also user can press this button to increase value when adjusting parameters.
⑸Quad
Use this button for full screen quad display on the monitor screen. If you push this button, DVR will display all 4 channels (cameras) at the same time in quad screen.
⑹● (REC)
Press “REC” button to start manual recording. Then you will see this mark●’ on‘ the selected channel of the screen, which means that the channel is now recording.
To stop manual recording, press “REC” again during recording mode.
⑺■ (STOP)
4