Q-See QSD42908C8 user manual Installation, Checking the DVR and Its Accessories

Page 7

QSD42908C8 User’s Manual

Chapter 2: Installation

Warning: Before you install the DVR, please make sure the power of DVR is switched off.

Notice: We also STRONGLY recommend that you plug the DVR and cameras into a Transient Voltage Surge Protector (UL-1449 rating). Look for a clamping voltage of 330 or lower, Joule rating of at least 400, and a response time of 10 nanoseconds or less.

2.1 Checking the DVR and Its Accessories

When you get the product, check that all the items are included in your product package. The Package should include:

1-QSD42908 DVR	1-8 way power supply for cameras
4-QOCDC60 cameras	8-60 foot cables for cameras
4-QOCDC36 cameras	9-Female RCA to Male BNC connectors
1- USB 2.0 Cable	1-320GB Hard Drive (installed in DVR)
1- USB Mouse	1-Remote Control (with 2 AA Batteries)
1-Product manual	1-RJ45 Ethernet Cable
1-Power supply for DVR	1-Installation CD

2.2Hard Drive (HDD) Installation

Notice: The QSD42908C8 bundled package includes a 320GB hard drive. So these steps are only necessary if you want or need to replace the hard drive or install a second drive or larger hard drive.

Installation instrument

One Phillips screw driver.

HDD installation

1.Remove the DVR box lid.

2.Place the HDD on the mounting plate.

3.Connect the ATA data cable correctly. The cable has three connectors for DVR main board, master HDD and slave HDD.

4.Plug in the HDD power connector.

5.Replace and reattach the DVR box lid.

Note: After the HDD is installed, it must be formatted. Please refer to Chapter 6.4.

7

Image 7

Contents QSD42908C8 Net DVR User’s Manual Index Chapter 100 Tech Support Product Introduction FeaturesSummary Others Network functionChecking the DVR and Its Accessories InstallationRear Panel Description System SetupFront Panel Operational InstructionsIndex Type Name Description Ready Index Name Description IR Remote ControlIf Remote Control Does Not Work Starting the Remote ControlDisabling the Remote Control Powering Down the DVRMenu Description Main Menu Description How to enter into menu modeQSD42908C8 User’s Manual How to exit menu Input text Basic Operation Guide Power onPreview Icon Icon Color Status Description Recording status Form 4-1 Camera record statusAlarm status Login User name and passwordChange Password QSD42908C8 User’s Manual PTZ Control Interface PTZ Pan/Tilt/Zoom ControlPTZ Control Keys Description Adjust Preset DescriptionStart/Stop Auto in PTZ Control Mode Select ChannelManual Record Exit PTZ Control ModeDescription Playback Interface PlaybackDescription Playback With Mouse Attached Control Bar Functions Backup Daily Recorded Files Backup Recorded FilesSelect backup device Using【POWER】key of front panel or IR remote control Shutting down the DVR normally Using menuAdministrator and Password Parameters Setup GuidePassword modification User management Add user Add and Delete UserEnter into User Management menu shown in fig Setup the rights for new user Setup the password for new userAdd new user name User rights description Local Save the new user’s password and rightsMAC address Remote through network or internetDelete user Unit name Unit Name and Device IDDevice ID Video output standard Video Output Standard and VGA SetupCamera name and OSD On Screen Display Setup VGA setupSystem Time Camera Name PositionDate OSD Position Video Parameters Setup Mask Area Setup Disable the mask check box means cancel the mask area Enter into Camera menu View Tampering AlarmVideo Loss Alarm QSD42908C8 User’s Manual Interface shown as fig Motion DetectionClear motion area QSD42908C8 User’s Manual Preview Properties Preview properties Recording SetupBit Rate Type Recording menu descriptionSelect a day and enable all day recording option All day recording setup Enter into recording schedule menuRecord type Save Select one day and disable all day recording optionSetup time period and record type Copy to other daysEnter into Alarm in Handling sub menu External Alarm Input and Relay OutputExternal alarm input setup Alarm typeSave setup Alarm trigger record channel setupSchedule for alarm handle method Alarm handle methodPTZ Linkage Setup alarm out schedule Alarm relay output setupSelect delay time Enter into alarm out scheduleExceptions Network menu description Network ParametersAdvanced setup description PPPoE DVR supports PPPoE dail-up function Accessing the DVR over a network Accessing the DVR from a remote computer PTZ menu description PTZ Pan, Tilt, ZoomPreset setup Sequence setup Cruise setup RS232 menu description 18 RS232 setupExample PPP Modem passive dialup through Pstn Setup at DVR endSetup should pay special attention to QSD42908C8 User’s Manual Establish the dialup connection Utilities Restore ParametersUpgrade Hard Disk Management Stop Alarm OutReboot Power OffBy Type View LogBy Time For example The steps of viewing alarm logBy Type&Date System Information FTP Server Setup Firmware UpgradeSetup username Upgrade Mode QSD42908C8 User’s Manual QSD42908C8 User’s Manual QSD42908C8 User’s Manual Step Step Appendix a Mouse Control Function User interface Test input interfaceScroll wheel forward Playlist interface= d i ⎟ 8⋅ 3600 ⎟1024 Appendix B HDD Capacity CalculationRJ45 introduction Pin definition How to Make a RS-485 Connect CableAppendix C DVR Connect Cable Definition Material and toolHow to Make a UTP network Connect Cable How to Make a RS-232 Connect CableCorresponding relationship of cross cable PAL 15FPS, Ntsc 20FPS Appendix D DVR SpecificationsModels QOCDC60 QOCDC36 Appendix D Camera SpecificationsFailure Possible reasons Appendix E TroubleshootingAppendix F Product Service & Warranty Appendix G Customer Information Card 101