Q-See QSD42908C8 user manual 18 RS232 setup, RS232 menu description

Page 71

QSD42908C8 User’s Manual

Note: Please make sure the PTZ camera you are using can support the cruise function.

5.18 RS232 setup

There is one RS-232 port on the DVR rear panel. In main menu, move “Active Frame” to

“RS232” icon and press the【ENTER】key, you will enter into “RS232” setup menu:

RS232 menu description

RS-232 parameters: Including baud rate, data bit, stop bit, parity, flow control, etc.

Work mode: The RS-232 can be used as “Console”, “PPP” or “Transparent Channel”.

Console: Connect with PC serial port. You can use HyperTerminal or NetTerm to control it.

PPP:Connect Modem, using PSTN to transfer video image.

Transparent channel: Connect serial devices. Remote PC can control these serial devices through a network.

PPPMode: Only used when work mode is “PPP”. There are two options: “Active” and “Passive”. “Active” means DVR will dialup through PSTN. “Active” function is currently not available. “Passive” means DVR will wait for dialup.

Callback mode: Only used when work mode is “PPP”. There are two options: “By Dialer” and “Preset Tel’. This function is not currently available.

Remote IP: Only used when work mode is “PPP”. This IP is defined for remote PC that will connect to DVR through PSTN.

Local IP: Only used when work mode is “PPP”. This IP is defined for DVR.

Mask: Only used when work mode is “PPP”. Remote IP and Local IP are in the same sub

71

Image 71

Contents QSD42908C8 Net DVR User’s Manual Index Chapter 100 Tech Support Summary FeaturesProduct Introduction Others Network functionChecking the DVR and Its Accessories InstallationRear Panel Description System SetupIndex Type Name Description Operational InstructionsFront Panel Ready Index Name Description IR Remote ControlIf Remote Control Does Not Work Starting the Remote ControlDisabling the Remote Control Powering Down the DVRMenu Description Main Menu Description How to enter into menu modeQSD42908C8 User’s Manual How to exit menu Input text Preview Power onBasic Operation Guide Icon Icon Color Status Description Recording status Form 4-1 Camera record statusAlarm status Change Password User name and passwordLogin QSD42908C8 User’s Manual PTZ Control Interface PTZ Pan/Tilt/Zoom ControlPTZ Control Keys Description Adjust Preset DescriptionStart/Stop Auto in PTZ Control Mode Select ChannelDescription Exit PTZ Control ModeManual Record Playback Interface PlaybackDescription Playback With Mouse Attached Control Bar Functions Backup Daily Recorded Files Backup Recorded FilesSelect backup device Using【POWER】key of front panel or IR remote control Shutting down the DVR normally Using menuPassword modification Parameters Setup GuideAdministrator and Password User management Enter into User Management menu shown in fig Add and Delete UserAdd user Add new user name Setup the password for new userSetup the rights for new user User rights description Local Save the new user’s password and rightsDelete user Remote through network or internetMAC address Device ID Unit Name and Device IDUnit name Video output standard Video Output Standard and VGA SetupCamera name and OSD On Screen Display Setup VGA setupSystem Time Camera Name PositionDate OSD Position Video Parameters Setup Mask Area Setup Disable the mask check box means cancel the mask area Enter into Camera menu View Tampering AlarmVideo Loss Alarm QSD42908C8 User’s Manual Interface shown as fig Motion DetectionClear motion area QSD42908C8 User’s Manual Preview Properties Preview properties Recording SetupBit Rate Type Recording menu descriptionRecord type All day recording setup Enter into recording schedule menuSelect a day and enable all day recording option Save Select one day and disable all day recording optionSetup time period and record type Copy to other daysEnter into Alarm in Handling sub menu External Alarm Input and Relay OutputExternal alarm input setup Alarm typeSave setup Alarm trigger record channel setupSchedule for alarm handle method Alarm handle methodPTZ Linkage Setup alarm out schedule Alarm relay output setupSelect delay time Enter into alarm out scheduleExceptions Network menu description Network ParametersAdvanced setup description PPPoE DVR supports PPPoE dail-up function Accessing the DVR over a network Accessing the DVR from a remote computer PTZ menu description PTZ Pan, Tilt, Zoom Preset setup Sequence setup Cruise setup RS232 menu description 18 RS232 setupExample PPP Modem passive dialup through Pstn Setup at DVR endSetup should pay special attention to QSD42908C8 User’s Manual Establish the dialup connection Utilities Restore ParametersUpgrade Hard Disk Management Stop Alarm OutReboot Power OffBy Type View LogBy Type&Date For example The steps of viewing alarm logBy Time System Information FTP Server Setup Firmware UpgradeSetup username Upgrade Mode QSD42908C8 User’s Manual QSD42908C8 User’s Manual QSD42908C8 User’s Manual Step Step Appendix a Mouse Control Function User interface Test input interfaceScroll wheel forward Playlist interface= d i ⎟ 8⋅ 3600 ⎟1024 Appendix B HDD Capacity CalculationRJ45 introduction Pin definition How to Make a RS-485 Connect CableAppendix C DVR Connect Cable Definition Material and toolHow to Make a UTP network Connect Cable How to Make a RS-232 Connect CableCorresponding relationship of cross cable PAL 15FPS, Ntsc 20FPS Appendix D DVR SpecificationsModels QOCDC60 QOCDC36 Appendix D Camera SpecificationsFailure Possible reasons Appendix E TroubleshootingAppendix F Product Service & Warranty Appendix G Customer Information Card 101