Q-See QC40198 user manual Please refer to the following chart for detailed information

Page 109

WEB OPERATION

QC40198 User Manual

 

 

 

 

 

 

Figure 7-45

Please refer to the following chart for detailed information.

 

 

 

 

Parameter

Function

 

Event

Includes local alarm/network alarm.

 

Type

Local alarm: Device detects alarm from input port.

 

 

Network: Device detects alarm from network.

 

Alarm in

Select corresponding alarm channel.

 

Enable

You need to put a checkmark here so that system can detect the

 

 

alarm signal.

 

Type

There are two options: normal open and normal close. NO becomes

 

 

activated in low voltage, NC becomes activated in high voltage.

 

 

 

 

Period

Alarm record function becomes activated in the specified periods.

 

 

There are six periods in one day. Put a checkmark to enable

 

 

corresponding period.

 

 

Select date. If you do not select, current setup applies to today only.

 

 

You can select all week column to apply to the whole week.

 

 

Click OK button, system goes back to alarm setup interface, please

 

 

click save button to exit.

 

Anti-dither

System only memorizes one event during the anti-dither period. The

 

 

value ranges from 0 to 15s.

 

Normal

Enable alarm activation function. You need to select alarm output port

 

Out

so that system can activate corresponding alarm device when alarm

 

 

occurs.

 

Alarm

System can delay the alarm output for specified time after alarm ends.

 

Latch

The value ranges from 10 seconds to 300 seconds.

 

 

 

 

Alarm

System can upload the alarm signal to the centre (Including alarm

 

upload

centre.

 

Record

System auto activates current channel to record once alarm occurs

 

Channel

(working with alarm activation function). Please note current device

 

 

shall be in alarm record period (Chapter 7.3.2.3 Schedule) and you

 

 

have enabled the schedule record function in chapter 7.3.3.3 Record.

 

Record

System can delay the record for specified time after alarm ends. The

 

Latch

value ranges from 10s to 300s.

100 P a g e

Image 109
Contents LCD Observation System Contact US See ProductsElectrical Safety Safety InstructionsThank You for Choosing a Q-See Product Warranty InformationCustomer Information Card Product RegistrationTable of Contents Backup Search 118 Features Features & SpecificationsAlarm Activation Function Included Mouse and Remote ControlUser-Friendly LCD Control Functions Storage FunctionSystem Resources SpecificationsChannel Information Motion Detection and Alarm Password Front Panel and Side Panel ControlsRear Panel Remote Control Controls Mouse Control Left Click DoubleMouse RightConnection Diagram Installation & ConnectionWhat’s in the Box Device Installation Hard Drive Installation Connecting Video Input Connecting Power SupplyConnecting Video Output Audio Input Connecting Audio Input & Output, Bidirectional AudioAudio Output Alarm input Alarm Input and Output ConnectionAlarm output How to connect PTZ camera Alarm Input and Output DetailsAlarm Output Port Alarm Input PortModel JRC-27F RS485 RS232Other Interfaces Login Login, Logout & Main MenuNavigation and Controls Main MenuLogout Auto Resume after Power FailureManual Recording Enable/Disable RecordBasic Operation Live ViewingStop All Channel Recording Enable all channel recordingSearch Menu Search & PlaybackNumber Function Playback Calendar ScheduleSchedule Menu Button Illustration RemarksSnapshot Quick SetupActivate Snapshot Image FTP Motion DetectionGo to Detect Menu Motion DetectNavigation and Controls Navigation and Controls Camera Masking Video LossTips Alarm setup Alarm Setup and Alarm ActivationNavigation and Controls Detect Device BackupTips Backup DevicePTZ Setup PTZ Control and Color SetupCable Connection Navigation and Controls Intelligent Positioning Key Preset/ Patrol/Pattern/ScanActivate Preset Preset SetupPatrol setup Tour Setup Auto Scan Setup Pattern SetupActivate Patrol tour Activate Pattern FunctionActivate Auto Scan FlipMenu Tree Main MenuMain Menu SettingGeneral Encode Schedule Network 4 RS232Main Menu IP Filter Advanced Network SetupPPPoE City /Region Name NTP SetupDNS Ddns SetupFTP Main Menu Detect AlarmDisplay 8 Pan/Tilt/ZoomMain Menu Default Advanced SearchHDD Management Abnormity Alarm OutputAccount Information TV AdjustAuto Maintain 2 BPS HDD InformationVersion 3 LogOnline Users ShutdownGo to Pan/Tilt/Zoom Menu Auxiliary MenuIntelligent Positioning Key Preset /Patrol / Pattern /Border FunctionActivate Patrol Patrol SetupActivate Border Function Border SetupFlip Network Connection WEB OperationPop-Ups and ActiveX Controls WEB Operation Login WEB Operation Real-time Monitoring Refresh Open AllStart Dialogue Local PlaySpeed Direction key and 3D positioning keyZoom/Focus/Iris 2 PTZAuto Scan PresetPattern Auto tourPicture Path and Record Path ColorWEB Operation Version Information ConfigureHDD information System InformationLog System Configuration General SetupPlease click save button to save your current setup DST Encode  One channel supports up to 4 privacy mask zones Schedule Whole week RS232 Network System default setup isA g e WEB Operation NAS NTP Alarm Please refer to the following chart for detailed information PTZ Motion DetectionWEB Operation WEB Operation PTZ Default & Backup Advanced HDD Management Here you can search alarm output status. See Figure Alarm I/ORecord Account Auto MaintenanceSnapshot Abnormity Additional Function WEB Operation WEB Operation Alarm WEB Operation About Un-install Web ControlLog out MY Q-SEE Ddns Setup MYQ-SEE DdnsMY Q-SEE Ddns MY Q-SEE Ddns Smartphone Access Smartphone AccessSymbian Combo DVR does not boot up properly. Possible causes TroubleshootingLCD does not work after device boots up. Possible causes System cannot detect hard drive. Possible causesReal-time video color is distorted. Possible causes There is no audio when monitoringCannot search local records Time display is not correct. Possible causesMotion detection function does not work. Possible causes Combo DVR cannot control PTZ. Possible causesCannot log in client-end or web. Possible causes Network connection is not stable. Possible causesAlarm signal cannot be disarmed. Possible causes Burn error /USB backup error. Possible causesAlarm function is not working. Possible causes Remote control does not work. Possible causesDaily Maintenance Appendix a HDD Capacity Calculation Appendix aAppendix B Compatible USB Drive List Appendix BAppendix C Compatible CD/DVD Burner List Appendix CAppendix D Compatible Sata HDD List Appendix DWD1600AABS2
Related manuals
Manual 8 pages 36.54 Kb

QC40198 specifications

The Q-See QC40198 is a high-performance surveillance camera designed to provide comprehensive security solutions for residential and commercial properties. This camera is a part of Q-See's extensive range of security products known for their durability, advanced technology, and user-friendly interface.

One of the main features of the QC40198 is its high resolution. Equipped with a 4MP sensor, this camera delivers crisp and clear images, allowing you to capture fine details even from a distance. This enhanced resolution ensures that you can identify faces, license plates, and other important details, contributing to an effective security system.

The QC40198 also boasts advanced night vision capabilities, utilizing infrared technology to provide clear images in low-light conditions. With a range of up to 100 feet, you can rely on this camera to monitor your property during the night, offering peace of mind even after dark. The automatic switching feature ensures that the camera seamlessly transitions between day and night modes, maintaining optimal visibility at all times.

In terms of durability, the QC40198 is built to withstand various weather conditions, making it suitable for outdoor installations. It features an IP66 weatherproof rating, which means it is resistant to dust and can endure heavy rain, ensuring continued functionality year-round. This robustness makes it a reliable choice for safeguarding your home or business.

The camera also incorporates advanced motion detection technology. This feature helps reduce false alarms by allowing you to set specific parameters for motion detection, ensuring that you are only alerted when necessary. Coupled with real-time alerts sent directly to your smartphone or tablet, you can monitor your property remotely and respond to potential threats promptly.

Another significant characteristic of the Q-See QC40198 is its compatibility with various smart home ecosystems. It can be easily integrated with other smart devices, providing you with the flexibility to expand and customize your security network as needed.

In conclusion, the Q-See QC40198 is a reliable and feature-rich surveillance camera ideal for those seeking an effective security solution. With its high resolution, night vision capabilities, durability, advanced motion detection, and seamless integration with smart home systems, this camera stands out as a top choice in the ever-evolving landscape of security technology. Whether for home or business use, the Q-See QC40198 delivers comprehensive surveillance to enhance safety and security.