Cable Management

WMK-027

WMK-027

Electronic Components

Electronic Components	WMK-027
Electronic Components
Cables
Cable Opening
Projector Hook-Ups

Step 1. The cable access holes are located at the end of the short throw mount and on the wall plate. Step 2. Route the cables through one end of the WMK-027 and out the other end.

Set Screw Installation (Optional)

The M6 set screw will be used in conjunction with any standard 1-1/2” NPT or CLS (sold separately).

Step 1. Thread in CLS or any 1-1/2” NPT until securely fastened.

Step 2. Thread in one (1) M6 x 6mm set screw.

Step 3. Use an M3 security wrench to tighten the M6 set screw (included in the PDS-PLUS hardware).

Electronic

Components

Cable Opening

Cables

Cable Opening

Projector Hook-Ups

Upper Mounting

Bracket

M6 Set Screw

M3 Security

Wrench

Installation Instructions

Page 11