Utilizing the Storage Feature
The storage feature may be used to store electronic components. There is an accessible door on each side of the storage enclosure. It may be securely held shut with the use of four (4) M5 x 12mm security head screws. It may be easiest to
Security
Wrench
M5 x 12mm
Security Screw
Electronic
Components
Electronic
Components
Door
Door
Step 1. Open the storage door that is located on the side of the wall plate.
Step 2. Place the electronic components inside the storage enclosure.
Step 3. Make all electronic connections at this time.
Step 4. Close the storage door and secure using two
(2; 1 upper and 1 lower) M5 x 12mm security head screws. Tighten using a security wrench. Repeat this process for the other side as well.
Attaching the Projector Arm
Mounting Hook Cutout
Mounting Hooks
Wall Plate
Projector Arm
Step 1. | Locate the mounting hook cutout on the top of the wall plate. |
|
Step 2. Tilt the arm slightly and gently insert the mounting hooks into the mounting hook cutouts. |
| |
Step 3. | Slowly lower and let the projector arm rest against the wall plate. |
|
Installation Instructions | Page 7 | |