Determining the Installation Height

WMK-027

In order to determine the installation height and throw distance, the PDS-PLUS projector bracket must be mounted to the projector. Please refer to the PDS-PLUS Installation Instructions prior to performing the following steps.

Refer to the projectors User’s Manual to determine the offset of the projector lens to the top of the screen/whiteboard.

PDS-PLUS Bracket

Projector

Lens

Step 1. Measure distance from center of lens to the top of the PDS-PLUS bracket.

Step 2. Add the distance from the ground to the top of the screen (A), the recommended offset from the projector manual (B), the measurement from Step 1 (C), and then add 1.5”.

(Example: A + B + C + 1.5” = ?)

Step 3. Measure the calculated distance from the top edge of the viewable area of the screen/whiteboard and mark the wall. This mark will represent the lower edge of the wall plate.

Mark

Top of Screen

Legend

A - Distance from ground to the top of the screen/whiteboard (viewable area).

B - Manufacturers recommended offset measurement. This measurement will be listed in the Users Manual.

C - Center of the lens to the top of the

PDS-PLUS bracket.

Add 1.5” to the calculated total. This total distance

will be the location for the bottom rail on the wallGround plate.

Page 4