SRS Labs WL66 Sound controls , SRS WOW sound Effects, dual, stable sound, Bass boost, Dual

Sound controls continued, SRS WOW™ sound

effects, dual, stable sound®

English

Bass boost

Bass boost enhances the depth of the sound. The difference will only be noticeable on sound with a strong bass.

1In the SOUND menu press down to highlight Bass boost. Use left or right to select On.

2Then press down to highlight Bass boost level and using left or right adjust to suit your preference.

When connecting to a Hi-fi unit, set the Speaker option to Off. Then select Fixed or Variable for the Monitor (Audio) in the AV connection menu.

(See 'Input Selection and AV Connections' section).

SRS WOW™ sound effects

SRS WOW™ is a suite of audio effects which use the

stereo signals being broadcast to produce enhanced sound from the television’s speakers. If mono sound is broadcast only TruBass will be available.

SRS 3D gives a rich sound experience, FOCUS

concentrates the sound and gives the effect of it coming from the centre of the television, TruBass enhances the lower bass frequencies.

1Press MENU and select the SOUND menu.

2Use up or down to highlight WOW then press OK.

3Press down to highlight SRS 3D and using left or right select between On or Off.

4Then press down to highlight FOCUS and press left or right to select between On or Off.

5Highlight TruBass and use left or right to select Off, Low or High to suit your preference.

NOTE: This feature is not available through headphones.

Dual

If a programme or film is being broadcast with a

soundtrack in more than one language, the DUAL feature

allows selection between them.

1Press MENU and select the SOUND menu.

2Use down to highlight Dual then press left or right to choose between Dual 1 or Dual 2.

Stable sound®

The Stable Sound feature limits high volume levels and prevents the extreme changes in volume that can occur when channels are changed or a programme switches to a commercial.

1Press MENU and select the SOUND menu.

2Use down to highlight Stable Sound then press left or right to select On or Off.