![](/images/new-backgrounds/1126607/12660711x1.webp)
English
Connecting external equipment
Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket.
SCART 2 (EXT2) | COMPONENT |
VIDEO (EXT3) | |
SCART 1 (EXT1) | CABLE HOLDER |
☛ | * |
|
| could |
a decoder |
| |||
be Digital | Satellite | |||
or any other | . | |||
|
|
|
| |
compatible | decoder | |||
|
|
FIXING STRAP
decoder*
media recorder
Aerial cables:
MEDIA REC.
TV
IN/OUT SAT
HDMI™ INPUT SOCKETS
HDMI™
Connect the aerial to the socket on the rear of the television. If you use a decoder* and/or a media recorder it is essential that the aerial cable is connected through the decoder and/or through the media recorder to the television.
SCART leads:
Connect the video recorder IN/OUT socket to the television. Connect the decoder TV socket to the television. Connect the media recorder SAT socket to the decoder MEDIA REC. socket.
Before running Auto tuning put your decoder and media recorder to Standby.
The phono sockets alongside the COMPONENT VIDEO INPUT sockets will accept L and R audio signals.
In addition there is a fixed/variable external audio ouput which enables the connection to a suitable
audio and video output. It is designed for best performance with 1080i
A wide variety of external equipment can be connected to the back of the television, therefore the relevant owners manuals for all additional equipment must be referred to.
We recommend SCART 1 for a decoder and SCART 2 for a media recorder.
If connecting
If the television automatically switches over to monitor external equipment, return to normal television by pressing the desired programme position button. To recall external equipment, press Bto select between EXT1, EXT2, EXT3 (C), HDMI1, HDMI2 or PC.
The cable holder can be used for aerial, media recorder and audio cables. Do not use the cable holder as a handle and make sure all cables are removed before moving the television.
HDMI, the HDMI logo, and
6