SRS Labs WL66 owner manual Input selection AV connections, Input signal selection

Page 22

English

Input selection and

AV connections

Defining the INPUT and OUTPUT sockets so that the television recognises connected equipment. See page 6 for a clear view of the back connection recommendations.

Most media recorders and decoders send a signal through the SCART lead to switch the television to the correct Input socket.

Alternatively press the external source selection button Buntil the picture from connected equipment is shown.

This button must be used to view equipment connected using the COMPONENT VIDEO INPUT (EXT3C).

An S in the display e.g. B2S (EXT 2S), indicates the input is set for an S-Video signal.

Input selection

Use the Input Selection if the television does not switch

over automatically.

1Press Bto select B1, B2, B3(C) (EXT1-3),HDMI1, HDMI2 or PC.

HDMI™ displays equipment connected to Input HDMI on the back of the television. It is designed for best performance with 1080i high definition signals.

PC displays a computer connected to Input RGB/PC on the back of the television.

2To return to television mode press Bagain or one of the numbered buttons.

INPUT signal selection

This specifies the type of signal going into SCART 2 (EXT2)

on the back of the television. Please refer to the

manufacturers instructions for the connected equipment.

1In the SET UP menu press down until

AV connection is highlighted, then press OK.

 

 

 

 

 

 

SET UP

1/2

Language

 

 

English

 

Country

 

 

UK

 

Auto tuning

 

 

OK

Manual tuning

 

 

OK

AV connection

 

 

OK

 

 

 

 

 

Picture position

 

 

OK

 

 

 

 

 

MENU Back

EXIT Watch TV

 

 

2With left or right select either AV or S-VIDEOas the required input for EXT2.

 

AV connection

PC/HDMI1 audio

PC

HDMI1 audio

Digital

EXT2 input

S-VIDEO

Monitor (Audio)

Fixed

MENU Back

EXIT Watch TV

If the colour is missing try the alternative setting.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents
Toshiba Contents Heat Damage Safety PrecautionsAir Circulation Mains SupplyPlease take note Installation and important informationWhere to install Side ViewRemote controlUP Inserting batteries and effective range of the remoteAerial cables Connecting external equipmentScart leads Signal name Pin No Connecting a computerSignal information for Mini D-sub 15 pin connector Please NoteUsing the controls and connections Switching onControls and input connections Manual tuning Auto tuningSelect your language SET UP Manual tuneProgramme skip Manual settingManual tune Programme skip HDMI2 HDMI1 B3C B2 DVDSelecting programme positions Using Auto tuningAuto tune, general controls, sound controls Sound controlsSRS WOW sound effects Sound controls , SRS WOW sound Effects, dual, stable soundBass boost DualWidescreen viewing Super Live149 Exact Scan Wide Super Live Cinema Subtitle 149Back light Picture controlsPicture position Picture positionBlack stretch Select Picture settings from the Picture menuPicture preferences Mpeg NR Noise ReductionBase colour adjustment Colour temperatureBase colour adjustment 3D Colour managementAutomatic format Widescreen Cinema modeSide panel adjustment Blue screenPanel lock TimerTimer Time DisplayPC Settings Clock phaseReset Sampling clockInput selection Input signal selectionInput selection AV connections Press Bto select B1, B2, B3C EXT1-3,HDMI1, HDMI2 or PCPC audio If the sound is missing select an alternative settingInput selection and AV connections HDMI1audioSelecting modes Navigating pages using AutoNavigating pages using List Text informationText services Control buttons For use with P fand P eto view sub-pages when availableCheck all lead connections Sampling clock and adjust until the lines clearCorrect input by pressing B Check that Panel lock is not onClock phase and adjust until the picture clears Check the Speaker option in the Sound menu is set to OffSpecifications and accessories