Insignia NS-LTDVD19-09CA manual Setting up DVD Dolby Digital, To highlight STEREO, Left

08-1154 NS-LTDVD19-09CA - ENG.fm Page 26 Monday, April 28, 2008 10:03 AM

Insignia NS-LTDVD19-09CA 19” LCD TV/DVD Combo

2 Press / to select the Audio icon	,	2 Press / to select the Audio icon	,
then press ENTER. The Audio Setup Page		then press ENTER. The Audio Setup Page
opens.		opens.

3 Press / to highlight Speaker Setup, then	3 Press / to highlight DOLBY DIGITAL
press ENTER. The Speaker Setup Page	SETUP, then press ENTER. The Dolby
opens.	Digital Setup Page opens.

4 Press / to highlight DOWNMIX, then press ENTER.

5 Press / to highlight LT/RT or STEREO, then press ENTER.

	• LT/RT-On a disc recorded with a		4 Press		/ to highlight DUAL MONO or
				D.R.C, then press ENTER.
	multichannel soundtrack, the output signal
	will be incorporated into the left and right			• DUAL MONO-This is the output mode for
	channel.			the left and right signals of the selected
	• STEREO-On a disc recorded with a			audio output. If it is set to MIXED MONO,
	multichannel soundtrack, the output signal			the function only works when the DVD
	will be incorporated into stereo.			uses 5.1-channel sound.
6	Press one or more times to go back to the			• D.R.C-Select to adjust the linear
	previous menu.			compression rate to obtain different
7	To close the menu, press to highlight the			compression results for the signals.
			5	Press	/ to highlight STEREO, LEFT
	Exit icon, then press ENTER.
				MONO, RIGHT MONO, or MIXED MONO,
Setting up DVD Dolby Digital				then press ENTER.
To set up Dolby Digital:			6	Press	/ to change the setting, then press
				ENTER.
1 While your TV is in DVD mode, press SETUP.			7	Press	one or more times to go back to the
	The Setup Menu opens.
				previous menu.
			8	To close the menu, press to highlight the
	-- GENERAL SETUP PAGE --			Exit icon, then press ENTER.
	TV DISPLAY	WIDE
	CAPTIONS	OFF
	SCREEN SAVER ON
	LAST MEMORY	ON

GOTO GENERAL SETUP PAGE

26 www.insignia-products.com