NS-15LCD 15" LCD TV
Setting up in Component mode
To set up in Component mode:
1Press MENU. The main menu opens.
2Press CH 
/
to select Window, then press VOL 
/ 
to open the Window menu. The Window menu opens.
Auto ConfigOff
Phase
80
Clock
60
H. Position
90
V. Position
Temp | 80 |
| |
|
|
| |
Red |
|
|
|
80 |
| ||
|
| ||
Green |
|
|
|
Blue | 80 |
| |
|
|
| |
| 60 |
| |
3Press CH 
/
to select the setting, then press VOL 
/ 
to adjust the setting.
Note
Auto Config is not available in Component mode.
Setting up in VGA mode
The native resolution of this TV is 1024 × 768, so your computer should be set to this resolution when you connect it to the TV.
This TV only supports refresh frequencies of up to 60 Hz, so set your computer accordingly. If you set it higher, the screen may flicker.
To set up in VGA mode:
1MENU. The main menu opens.
2Press CH 
/
to select Window, then press VOL 
/ 
to open the Window menu. The Window menu opens.
3Press CH 
/
to select the item you want to set, then press VOL
/ 
to adjust the setting.
Note
The Phase and Clock settings should be adjusted until you get a good picture.
If you experience problems when adjusting the settings, set Auto Config to Off, then reset it to On. The TV resumes its original settings.