PREPARATION
NAME OF EACH PART OF PROJECTOR
FRONT OF CABINET
SPEAKERS
INFRARED
REMOTE RECEIVER
PROJECTION LENS
LENS CAP 
CAUTION
Do not turn on a projector with lens cap attached. High temperature from light beam may damage lens cap and result in fire hazard.
POWER CORD
CONNECTOR
MAIN ON / OFF
SWITCH
CARRYING HANDLE
LEVEL AND TILT ADJUST HANDLE
BACK OF CABINET
EXHAUST VENT
HOT AIR EXHAUSTED !
Air blown from exhaust vent is hot. When using or installing a projector, following precautions should be taken.
●Do not put a flammable object near this vent.
●Keep rear grills at least 3’ (1m) away from any object, especially
●Do not touch this area, especially screws and metallic parts. This area will become hot while a projector is used.
This projector detects internal temperature and automatically controls operating power of Cooling Fans.
INFRARED
REMOTE RECEIVER
LAMP COVER
BOTTOM OF CABINET
AIR INTAKE VENTS
This projector is equipped with cooling fans for protection from overheating. Pay attention to following to ensure proper ventilation and avoid a possible risk of fire and malfunction.
●Do not cover vent slots.
●Keep bottom clear of any objects. Obstructions may block cooling air.
AIR FILTER
ADJUSTABLE FEET
ADJUSTABLE FEET
7