IBM LC-UXT3 manual Wireless Mouse mode, Projector mode, Usb, Lamp counter reset

SETTING

USB

This Projector is equipped with USB port for interactive operation

between a projector and computer. Set mode following steps below.

Wireless Mouse mode

USB

Press SELECT button at this icon to display previous items.

Select " " when controlling a computer with Remote Control of this projector.

Projector mode

Select " " when controlling a projector with computer.

NOTE: Before you control a projector by computer, install USB driver (optionally sold parts) and set up computer following instruc- tion in USB driver package. Contact your authorized dealer.

Move a pointer to item and then press POINT LEFT/RIGHT button(s).

Lamp counter reset

Be sure to reset Lamp Counter when Lamp Assembly is replaced. When Lamp Replace Counter is reset, LAMP REPLACE indicator stops lighting.

1	Turn projector on, press MENU button and ON-SCREEN
	MENU will appear. Press POINT LEFT/RIGHT button(s) to
	move a red frame pointer to SETTING Menu icon.
2	Press POINT DOWN button to move a red frame pointer to
	“Lamp counter reset” and then press SELECT button.
3	Move arrow to replaced lamp number (Lamp 1, Lamp 2, Lamp 3
	or Lamp 4) and then press SELECT button. Message "Lamp
	replace counter Reset?" is displayed. Move pointer to [Yes] and
	then press SELECT button.
	NOTE: Be sure to reset correct lamp number otherwise LAMP
	REPLACE indicator continues lighting.
4	Another confirmation dialog box appears and select [Yes] to
	reset Lamp Replace Counter.

Do not reset Lamp Replace Counter except after Projection lamp is replaced.

Quit

Closes SETTING MENU.

13

24

Move pointer to Lamp counter reset and then

press SELECT button. Move arrow to replaced lamp number (Lamp 1, Lamp 2, Lamp 3 or Lamp 4) and then press SELECT button.

Message "Lamp replace counter Reset?" is displayed. Move pointer to [Yes] and then press SELECT button.

42