INSPECTION, MAINTENANCE, AND CLEANING
1.
WARNING! Prior to performing any inspection, maintenance, or cleaning of the Blast Cabinet, turn the Power Switch (1A) to its “OFF” position and unplug the unit from its electrical outlet. Turn off the air compressor. Press the Foot Pedal (11) of the Blast Cabinet to release any remaining compressed air in the system. Then, disconnect the compressor’s air hose from the Blast Cabinet.
2.Before each use, inspect the general condition of the Blast Cabinet and its acces- sories. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, damaged hoses, and any other condition that may affect safe op- eration. If abnormal noise or vibration occurs, have the problem corrected before further use. Do not use damaged equipment.
3.Before, during, and after use: Periodically, check the Water Filter in the air com- pressor system for excessive water
4.To clean the exterior of the Blast Cabinet, wipe with a clean, damp cloth using a mild detergent or mild solvent.
5.Disposal of media: Always follow local solid waste authority guidelines when disposing of used media.
6.
CAUTION! All maintenance, service, and repairs not mentioned in this manual must only be performed by a qualified service technician.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISKS AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
SKU 94274 For technical questions, please call