If your television is equipped with the optional surround sound module,
Surround sound | 13 |
Select speakers for movie sound
you can extend your system in to a surround sound system by adding four Bang & Olufsen loudspeakers and a BeoLab 2 subwoofer*.
When you switch on one of the sources, speakers in a surround sound system can be cut in or out, depending on what kind of sound suits the source you are using.
You can select the speaker combination that suits the source you are using, provided that the various sound modes are available in your system.
Press repeatedly to display | LIST |
SPEAKER on Beo4 |
|
SPEAKER | |
Press the number of the speaker | 1 – 5 |
combination you want. The |
|
selected speakers cut in |
|
automatically |
|
Press to adjust the balance |
|
between the front and rear |
|
speakers |
|
Press to adjust the balance |
|
between the left and right |
|
speakers |
|
Press to remove SPEAKER from | EXIT |
the Beo4 display and return to |
|
the source you were using |
|
If you have added only two front speakers to the television, you will only be able to choose SPEAKER
Speaker combinations
SPEAKER 1 … Sound in the centre speaker only. SPEAKER 2 … Stereo sound in the two front
speakers. The BeoLab 2 subwoofer is active. SPEAKER 3 … The centre speaker, front speakers
and the BeoLab 2 subwoofer are active. SPEAKER 4 … Enhanced stereo sound in the front
and rear speakers. The BeoLab 2 subwoofer is active.
SPEAKER 5 … Surround sound from all speakers including the BeoLab 2 subwoofer. For programmes encoded in Surround Sound.
SPEAKER 4 and 5 are only available if your tele- vision is equipped with the optional surround sound module.
*NOTE! For further information about how to connect speakers to the television, refer to the chapter ‘Loudspeaker setup – surround sound’ on page 48.