51
Calibrate the sound level
When you have connected speakers in a surround sound setup to the television, you must perform a speaker calibration.
A calibration sound is produced alternately in each of the speakers you have connected in your surround sound setup. Your task is to adjust the sound level from all the connected speakers to match the sound level from the centre speaker. You can choose whether you want the sound sequence to occur automatically or manually.
Once you have performed your speaker calibration, you will only need to
>Press MENU to bring up the TV SETUP menu and press to highlight OPTIONS.
>Press GO to bring up the OPTIONS menu and press to highlight SOUND.
>Press GO to bring up the SOUND SETUP menu and press to highlight SPEAKER LEVEL.
>Press GO to bring up the SPEAKER LEVEL menu. SEQUENCE is highlighted.
>Press or to choose between AUTOMATIC and MANUAL.
>Press or to adjust the speaker sound and or to move to another speaker.
>When you have adjusted the sound for all the speakers in your surround sound setup, press GO to store or press EXIT to leave the menu without storing.
The sound level from the television speakers functions as your point of comparison with the external speakers and can not be adjusted here.
SPEAKER LEVEL
SEQUENCE AUTOMATIC
LEFT FRONT . . . . . . . .
RIGHT FRONT . . . . . . . .
RIGHT REAR . . . . . . . .
LEFT REAR. . . . . . . .
store GO
It is not necessary to calibrate subwoofer sound in a surround sound setup. If you still wish to adjust subwoofer sound when your speaker calibration is complete, refer to the section ‘Sound adjustments’ on page 52.