Black Box KV7020A, KV7021A manual Audio connections

Page 15

2- AND 4-PORT SERVSWITCH DT PRO II

Figure 3-3. Audio connections.

3.2.2POWERING ON THE SERVSWITCH

Connect the 9-VDC power adapter’s barrel connector to the power jack on the rear of the switch. Then plug the power adapter cable into an available power outlet. See Figure 3-4.

9-VDC power

adapter

Figure 3-4. Power connections.

14

Image 15

Contents 4-Port ServSwitch DT Pro Federal Communications Commission 4-PORT Servswitch DT PRO NOM Statement Trademarks Used in this Manual Contents Hotkeys Yes SpecificationsSpecifications Introduction OverviewComponents Overview❾ ❺ ❼ ❽ ❻ ❿ ❼ ❽ ❼ ❽ ❼ ❽ ❼ ❽ What You’ll Need to Supply What’s IncludedInstallation ServSwitch PlacementHardware Installation Installation Audio connections USB computer connections USB peripheral connections Operation Powering Up the SystemSelecting Computers Using Front-Panel Buttons Selecting Computers Using Keyboard Hotkey CommandsCommand Command/Description Previous PC channel. Toggle between Stop Autoscan Appendix. Troubleshooting Calling Black BoxShipping and Packaging Copyright 2007. Black Box Corporation. All rights reserved