NETGEAR XCM89UP, XCM8948, XCM8924X, XCM8944F, XCM89P manual Technical Support

Page 20

Technical Support

Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product and use it to register your product at https://my.netgear.com. You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website.

To contact NETGEAR for support, go to http://support.netgear.com/general/contact or call (US only) 1-888-NETGEAR. In other countries, visit http://support.netgear.com/general/contact/default.aspx for phone numbers.

For product updates and web support, visit http://support.netgear.com. NETGEAR recommends that you use only the official NETGEAR support resources.

You can get the user manual online at

http://downloadcenter.netgear.com or through a link in the product’s user interface.

Trademarks

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/ or other countries. Information is subject to change without notice. © NETGEAR, Inc. All rights reserved.

Compliance

For the current EU Declaration of Conformity, visit:

http://support.netgear.com/app/answers/detail/a_id/11621/.

For regulatory compliance information, visit:

http://www.netgear.com/about/regulatory/.

NETGEAR, Inc.

350 East Plumeria Drive

San Jose, CA 95134, USA

August 2014

Image 20
Contents Installation Netgear ProSAFE M6100 Chassis SwitchContents M6100 Series Front Panels Before Installing the Switch Blade Install the Chassis ¾¾ To bracket-mount the chassisInstall the Fan Tray ¾¾ To install the fan trayInstall the Switch Blade Page Install the Power Supply ¾¾ To install the power supplyInstall Optional PoE XCM89P or UPoE XCM89UP Board ¾¾ To install the optional PoE XCM89P or UPoE XCM89UP boardConfigure the Switch Blade Computer in Dhcp Client Mode Without a Dhcp Server ¾¾ To configure the switch Computer with a Static IP AddressData bits Parity. None Stop bit Flow control. None Page Computer in Dhcp Client Mode with a Dhcp Server Data bits Parity. None Stop bit Flow control. None Page Page Technical Support