Changing settings
all DVRs were not created equal
Audio Output
Change the audio output type to match your audio connection and equipment (see table 2).
Table 2: Audio connections and selections
Audio connection | Preferred selection |
|
|
S/PDIF (coaxial or optical) | Dolby Digital |
|
|
RCA (red and white) | Stereo |
|
|
RF (some models) | Mono |
|
|
The media center can output sound in Dolby Digital, stereo, or mono.
Audio Output
If you use a S/PDIF output to a Dolby Digital receiver or amplifier, choose dolby digital (system or game soun effects won’t
playChannelswhen tuned to Dolby Digital programming).
Set Relock Timer
If you use audio L R outputs (red and white connectors), choose stereo.
If you use the RF “To TV” output (coax cable) to your TV, or if you use audio L or
1 of 2 | next |
Figure 31: Changing the audio output
103:55
3
recordcloseries dolbyrecorddigitalonce stereowatch
clmonose
see all times
1.To change the audio setting, go to the Audio Output card in the Settings category.
2.Choose the desired output setting, and then choose close.
System and game sound effects do not play when audio output is set to Dolby Digital.
© 2006 by Digeo, Inc. All rights reserved. | Media Center User Guide | 33 |