| 799&56$7 | # | TRIAX DVB 75 SI |
3 |
| 3 | You can use the [P+] and |
| the previous or next channel of the programme list. | ||
| You can use the numeric buttons of the remote control | ||
| any channel number from the active programme list. The numbers |
entered are displayed in a small box at the bottom
If you hesitate more than 3 seconds after entering a number of the channel number, the satellite receiver assumes that you have completed your entries and switches to the channel number entered.
The satellite receiver will switch more rapidly if you press the [OK] button when you have entered the last number.
The [arrow up] and [arrow down] buttons of the remote control can be used for changing channels just as [P+] and
4XLFNFKDQJHRIFKDQQHOVIURPWKHIURQWSDQHO
In addition to the [standby] button on the satellite receiver front panel, there are two buttons that have the same functions as the [P+] and
4XLFNFKDQJHRIFKDQQHOVYLDDVFUHHQOLVW
As an alternative to the methods for change of channel described above a screen picture can display the active programme list.
The programme list will be displayed on the screen when the [OK] button is pressed during ordinary TV watching.
You can scroll through this programme list using the [arrow buttons] of the remote control and switch to any channel by marking it in the list and pressing the [OK] button of the remote control.
At the top of the screen you can see which programme list is currently active (the picture shows a red list, the Danish programme list). You may change to one of the other lists by setting the receiver in standby mode (press the [standby] button), and switching it on again by pressing one of the other [coloured buttons].
When the [back] button is pressed, the screen list will disappear without any change of channel.
17