Tuner, KU Switch, Position DiSeqC, LNB Freq, 22KHz

ƇTuner

•Press the LEFT/RIGHT button to select the Tuner and then press the OK button.

•When the Tuner pop-up window appears, press the UP/DOWN button to select Tuner 1or Tuner 2 and then press the OK button.

The selected Tuner will play.

You can select C/KU band by selection of switch type. (None, DiSEqC Switch)

After selecting a satellite, please select position number.

To change value, press the OK button.

The position list will be displayed.

Select the proper LNB frequency referring to your LNB using the OK and the UP/DOWN buttons.

ƇC-LNB Freq.

When selecting the C/KU Switch is selected as “None”, the C-LNB Freq will be dimmed automatically.

Press the OK button, and then the C-LNB Freq. list will be displayed. You can also input the freq. you want. After inputting freq.

Using the NUMERIC buttons, press the OK button. (None, DiSEqC Switch)

Select the LNB Power On or OFF.

Depending on the user’s antenna switch box or LNB. You can supply either 22KHz by setting “ON” or not by setting “OFF”.

Depending on the user’s antenna switch box. (“off”, “SAT A” or “SAT B”)

You can select and use appropriate port for your DiSEqC switch box.

Press the OK button to select DiSEqC List. (None, DiSEqC A, DiSEqC B,

DiSEqC C, DiSEqC D, Motor, USALS)

Press the BLUE button to set Drive(Fine Drive or Normal Drive) to run the motor.

•Fine Drive/Normal Drive

To move the motor, press the LEFT/RIGHT button.

•Go to zero

To move the zero position, press the OK button.

•Store to location

To store the current position, press the OK button.

•East Limit

To set the east limit by current position, press the OK button.

•West Limit

To set the west limit by current position, press the OK button.

•Clear Limit

To clear the stored limit value, press the OK button.