1.5Connecting and Installation
1.5.1How to connect the receiver to various other systems
There are several ways of connecting the receiver to your TV, VCR and/or
1.5.2 To Connect Satellite Antenna (DiSEqC 1.0)
• Connect the coaxial cable from the LNB to the LNB IN jack on back of the receiver.
• Satellite Receiver
• Satellite Receiver
1.5.3 To Connect Motorized System (DiSEqC 1.2)
•Connect one end of your coaxial cable to the LNB IN connector on the receiver and the other end to the REC or Receiver connector on the DiSEqC 1.2 motor.
•Connect the coaxial cable from the LNB to the LNB connector on the DiSEqC 1.2 motor.
1.5.4 Connect the receiver to a TV set
• Connect the delivered LOOP cable of about 15 cm according to the picture.
• Satellite Receiver
• Connect the delivered LOOP cable of about 15 cm according to the picture.
•Connect the receiver to a TV set with SCART, if your TV set is equipped for it. Alternatively you can use A/V, TV out (UHF) or S/Video jacks.
1.5.5 Connect the receiver to a VCR
• Connect the SCART jack from the VCR to the back of the receiver.
• Satellite Receiver
• Video
• TV
8