3M 2220M manual

Page 11

512 Hz – Sonde frequency indicated by sonde icon.

Press the down key to enable/disable the frequency. A check mark will appear in the box when the frequency is enabled.

640 Hz - Sonde frequency indicated by sonde icon.

Press the down key to enable/disable the frequency. A check mark will appear in the box when the frequency is enabled.

33 kHz - Sonde frequency indicated by sonde icon.

Press the down key to enable/disable the frequency. A check mark will appear in the box when the frequency is enabled.

Radio or LF - Low Frequency Band:

15 Khz–30 kHz

Press the down key to enable/disable the frequency. A check mark will appear in the box when the frequency is enabled.

CATV – 31.5 kHz

Press the down key to enable/disable the frequency. A check mark will appear in the box when the frequency is enabled.



Image 11
Contents Operator Manual 3M DynatelContents Introduction Model Number Included in Equipment Package Optional 3M Dynatel AccessoriesStandard 3M Dynatel 2220M Locator Equipment Packages ➊ ➋ ➌ ➍ Transmitter Battery Installation Transmitter OverviewQuick Start  Warning Receiver Battery InstallationReceiver Overview ➍ ➎ ➌ ➏ ➐3M Dynatel Dyna-Coupler Clamp Transmitter OperationsDirect Connection Induction Method Receiver Operations Initial SettingsReceiver Setup Line Locate Frequencies Selection DefaultPage 50 Hz / 60 Hz Line Locating Screen ➌ ➍ ➑ ➎Depth and Current Pipe and Cable LocatingSonde Locating Screen ➌ ➐ ➍ ➎Sonde Locating Pin-Pointing the Sonde Transmitter SpecificationsReceiver Environmental Cleaning InstructionsStatement of Intended Use CE ComplianceStatement of Conformity Track and Trace Solutions