Denon DN-V310, DN-V210 When Audio Setup is selected, Digital Output, Dynamic Range, Normal, Off

ENGLISH

When “AUDIO SETUP” is selected

TOP MENU
/PBC	MENU

2,3

	ENTER
ANGLE	RETURN

DISPLAY STOP STILL/PAUSE PLAY

SLOW/SEARCH SKIP

SETUP NTSC/PAL ZOOM SLIDE SHOW

1

1Set the “AUDIO SETUP” in SETUP mode. (See page 20.)

Use the 5 and ∞ cursor buttons to select the desired setting.

DIGITAL OUTPUT

Use this to select the digital output’s signal format.

96k LPCM OUT
Use this to set the digital audio output when playing DVDs recorded in		Remote control unit
linear PCM audio.
2 DYNAMIC RANGE
This has the effect of reducing the size difference between audio
outputs. Even if the audio output is set to MIN, you can still hear audio
	AUDIO SETUP
or conversations.	DIGITAL OUTPUT		PCM
	96K LPCM OUT		96k
	DYNAMIC RANGE		MAX
NOTE:

•Dynamic range is displayed when the “SETUP MENU MODE” at “SYSTEM SETUP” is set to “EXPERT”.

SELECT:	SET: ENTER BUTTON
SET DIGITAL OUT

	Press the ENTER button to decide the menu item.
	q When “DIGITAL OUTPUT” is selected:
	Use the 5 and ∞ cursor buttons to select the output format, press	ENTER
	the ENTER button to decide.
	NORMAL
	When playing DVDs recorded in Dolby Digital or DTS, bitstream
	signals are output from the digital audio output terminals. When	Remote control unit	Remote control unit
	playing DVDs recorded in linear PCM, linear PCM signals are
3	output.
	Select “NORMAL” when making digital connections to an AV	q
	amplifier with built-in Dolby Digital and DTS decoder.	AUDIO SETUP
	PCM (Factory default)	DIGITAL OUTPUT	PCM
		96K LPCM OUT	96k
	When playing Dolby Digital bitstream signals or DVDs recorded in
		DYNAMIC RANGE	MAX
	linear PCM, the signals are converted into 48 kHz/16-bit PCM (2-
	channel) signals and output from the digital outputs. When playing
	DVDs recorded in PCM, linear PCM signals are output.
	OFF	SELECT:	SET: ENTER BUTTON
		SET DIGITAL OUT

Digital audio is not output.

26