ENGLISH
3CAUTIONS ON HANDLING DISCS
4CONNECTIONS
Discs
Only the discs including the marks shown on page 5 can be played on the
Note, however, that discs with special shapes (heart- shaped discs, hexagonal discs, etc.) cannot be played on the
Cautions on Handling Discs
•Do not get fingerprints, grease or dirt on discs.
•Be especially careful not to scratch discs when removing them from their cases.
•Do not bend discs.
•Do not heat discs.
•Do not enlarge the center hole.
•Do not write on the labeled (printed) side with a ball- point pen or a pencil.
•Water droplets may form on the surface if the disc is moved suddenly from a cold place to a warm one. Do not use a hairdryer, etc., to dry the disc.
NOTES:
• Read the manuals of all the components when | • Be sure to connect the left and right channels |
making connections. | properly, L (left) to L, R (right) to R. |
• Keep the power supply cord unplugged until all | • Plug the power supply cord securely into the power |
connections have been completed. | outlet. Incomplete connection may result in noise. |
• If the power is on when connections are made, | • Binding the power supply cord together with |
noise may be generated and damage the speakers. | connection cords may result in humming or noise. |
(1)Connecting to a TV
•Use the included audio video cord to connect the TV’s video input connector and audio input connectors to the
Holding Discs
Avoid touching the surface of discs when loading and unloading them.
Be careful not to get fingerprints on the signal surface (the side which shines in rainbow colors).
Cleaning Discs
2Fingerprints or dirt on the disc may lower sound and picture quality or cause breaks in playback. Wipe off fingerprints or dirt.
2Use a commercially available disc cleaning set or a soft cloth to wipe off fingerprints or dirt.
Wipe gently from the | Do not wipe with a circular |
middle outwards. | motion. |
NOTE:
•Do not use record spray or antistatic. Also do not use volatile chemicals such as benzene or thinner.
Cautions on Storing Discs
•Always eject discs after playing them.
•Keep discs in their cases to protect them from dust, scratches and warping.
•Do not put discs in the following places:
1.Places exposed to direct sunlight for long periods of time
2.Humid or dusty places
3.Places exposed to heat from heaters, etc.
Cautions on Loading Discs
•Only load one disc at a time. Loading one disc on top of another may result in damage or scratch the discs.
•Load 8 cm discs securely in the disc guide, without using an adapter. If the disc is not properly loaded, it may slip out of the guide and block the disc tray.
•Be careful not to let your fingers get caught when the disc tray is closing.
•Do not place anything but discs in the disc tray.
•Do not load cracked or warped discs or discs that have been fixed with adhesive, etc.
•Do not use discs on which the adhesive part of cellophane tape or glue used to attach the label is exposed, or discs with traces of tape or labels that have been peeled off. Such discs may get stuck inside the player, resulting in damage.
CAUTIONS ON INSTALLATION
For heat dispersal, leave at least 10 cm of space between the top, back and sides of this unit and the wall or other components.
10 cm or more |
S-Video output connector
The video signals are divided into color (C) and brightness (Y) signals, achieving a clearer picture.
If the TV is equipped with an
To power outlet | |
|
TV
L
R
AUDIO IN
NOTES:
Record Thinner Benzene spray
B |
10 cm or more
wall |
•Connect the
•Set the “TV TYPE” in “VIDEO SETUP” in “SETUP“ to comply with your TV's video format. When the TV is PAL formated, set to PAL. (See page 18.)
•To use with
•Set the “TV ASPECT” in “VIDEO SETUP” in “SETUP” to comply with your TV’s aspect. (See page 18.)
•To use with video out or
6