Denon DVD-A11 Connecting a basic 5.1-channel surround system, Connecting to a Stereo Component

Page 9

(5) Connecting a basic 5.1-channel surround system

Analog 5.1-channel audio signals can be output from the DVD-A11.

The multichannel audio signals recorded in packed PCM and the multichannel Super audio CDs can be played when an AV amplifier equipped with analog 5.1-channel audio inputs is connected.

To power outlet

DVD-A11

ENGLISH

(6)Connecting to a Digital Recorder (MD Recorder, DAT Deck, etc.)

Set the “AUDIO SETUP” default setting as shown below. (See page 20.)

“DIGITAL OUT” “PCM”

“LPCM (44.1 kHz / 48 kHz)” “ON”

Playing DVDs with incorrect settings may result noise that could damage your ears or the speakers.

DVD-A11

Center speaker

B

Digital audio input connector (OPTICAL)

Optical fiber cable (commercially available)

(or)

75 /ohms pin-plug cable (commercially available)

Digital audio input connector (COAXIAL)

Front speaker (left)

 

SUBWOOFER

Front speaker (right)

CENTER

SURROUND

FRONT

 

 

 

Subwoofer

NOTE:

Digital audio signals cannot be output when playing Super Audio CDs. Use analog connections to record Super Audio CDs.

Surround speaker (left)

 

 

 

 

 

Surround speaker (right)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AV amplifier with 5.1-channel input terminals

NOTES:

For multi-channel connections, set “AUDIO CHANNEL” under “AUDIO SETUP” at “SETUP” to “MULTI CHANNEL” and make the “SPEAKER CONFIGURATION”, “CHANNEL LEVEL” and “DELAY TIME” settings. (See pages 19, 20.)

With the DVD-A11, we recommend turning the digital output off and only outputting analog signals in order to keep interference from the digital output circuitry to the minimum and allow you to enjoy high bit, high sampling frequency, high quality multi-channel sound.

(7) Connecting to a Stereo Component

DVD-A11

Stereo component

NOTE:

When connecting to a 2-channel audio stereo device, set “AUDIO CHANNEL” under “AUDIO SETUP” at “SETUP” to “2 CHANNEL” (see page 19). For multi-channel sources, the signals are down-mixed into two channels (analog).

(Only the front left and right channels are output for sources for which down-mixing is prohibited.)

9

Image 9
Contents 040 039135 042 136Übereinstimmungserklärung Declaration of ConformityDeclaration DE Conformite Dichiarazione DI ConformitàE r t y O !0 English FeaturesDiscs Cleaning Discs Connecting to a TVConnections DiscsSatellite receiver Color component output connectors PR/CR, PB/CB and YThis unit Video cassette recorder Scart terminal TV setWhen not using the terminal, attach the cap to Connecting to a AV amplifier with a Built-in decoderNot to lose it Protect the terminal from dustConnecting to a Digital Recorder MD Recorder, DAT Deck, etc Connecting a basic 5.1-channel surround systemConnecting to a Stereo Component Set the Audio Setup default setting as shown below. SeeDenon Link connections Denon Link S.E. settingsIeee 1394 connections Denon Link Second EditionFront Panel Part Names and FunctionsMulti StereoDisplay Rear PanelNames and Functions of Remote Control Unit Buttons Remote Control UnitUsing the Remote Control Unit Inserting BatteriesLoading Discs Loading Discs Changing the Default SettingsSetup items for use When Disc Setup is selectedDisc Menus OFF Language code listWhen OSD Setup is selected When Video Setup is selectedDisplay Picture Size Progressive ModeWhen Audio Setup is selected Denon LinkSource Direct Normal Factory default When Digital OUT is selectedPCM 2ndFormat Format 1 Factory defaultPassword When Ratings is selectedNo Limit Factory default Rating LevelAuto Power Mode When Other Setup is selectedSlide Show VideoPlayback PlaybackSkipping to the Beginning of Chapters or Tracks Playing Still Pictures PausingStopping Playback Slow Playback for DVD-videos and video CDs onlyUsing the Mode SET UP Selecting the still image only for DVD-audiosPlaying bonus groups only for DVD-audios Image Quality Adjustment Adjusting the Picture QualityWhen Image Quality Adjustment 2 Is Selected Adjusted Black Level -5 to +5 Factory defaultWhen Noise Reduction Adjustment Selected and Adjusted Using the ON-SCREEN Display Setup Level 0 IRE, 7.5 IREReference Playing Repeatedly Playing Repeatedly Repeat PlaybackPlaying a Certain Section Repeatedly A-B Repeat Playback Playing Tracks in the Random Order Playing Tracks in the Desired OrderUse the number buttons to select the track Specified and programmed. Bonus tracksPlaying Back WMA 17 MP3 PlaybackListening to MP3 CD, CD-Rs and CD-RWs Playing Still Picture Files Jpeg Format Playing still picturePlaying still pictures stored on CD-Rs/RWs Then press the Enter button Remote control unitUse the cursor button to select Root Use the and ª cursor buttons on the remoteUsing the Multiple AUDIO, Subtitle and Angle Functions Switching the Audio Language Multiple Audio FunctionSwitching the Subtitle Language Multiple Subtitle Function Using the Menus Switching the Angle Multiple Angle FunctionUsing the Top Menu Setting Marks DVD-AUDIO / DVD-VIDEO Using the DVD MenuMarking Scenes YOU Want to see Again Calling Out Marked Scenes and Clearing MarksPlaying in the Zoom Mode TroubleshootingCheck again before assuming the player is malfunctioning Main Specifications 16-11, Yushima 3-CHOME, BUNKYO-KU, Tokyo 113-0034, Japan