Position
After selecting Position from the INSTALLATION screen a 
and 
keys or use the numeric keypad to change the value of the digits. Press the 
key to advance or the 
key to back up. Once you have entered all of the correct digits, select OK. The calculated results on the proper direction to point your dish will be displayed.
System Test
Any time you experience a problem with your DIRECTV System, you can use the SYSTEM TEST screen, which runs a series of internal diagnostics that will provide
you with basic information about the health of your system.
Things to do on the SYSTEM TEST screen
Receiver Test
Anytime you experience a problem with your system, you can run the SYSTEM TEST, which runs a series of internal diagnostics that provide you with basic information about the system.
SYSTEM TEST screen
Depending on your test results, you may be able to remedy the
problem yourself. For example, if your Access Card is missing, verify it is facing the right direction and try reinserting it. A “No Dial Tone” message indicates that the phone line is in use or the digital satellite receiver is disconnected from the phone line. If you cannot remedy a problem yourself, call your dealer or the Customer Care Center at
Cable Test
When Cable Test is selected the digital satellite receiver scans through all transponders and displays the associated signal strength. If there are any detectable problems, you will be notified of the most likely cause of the problem. Otherwise, you may simply find this test to be a convenient way to analyze the signal quality your are achieving.
PAGE