9.2.2 DiSEqC 1.2
ySelect
yPress OK to access the DiSEqC 1.2 set up menu.
yTo define the
x Move East/West: Press e/f buttons to move
the motor.
xEast Limit: Press OK button to fix East Limit.
xWest Limit: Press OK button to fix West limit.
xDisable Limits: Press OK button to disable East/West Limits.
xGo to Reference: Press OK button to move the
motor to center (0) position.
yPress f button to move west or e button to move east on the corresponding row. Press OK button to stop.
yNudge East/West: Fine tune the position using e/f buttons by adjusting 1 step.
yGo to Satellite: Press OK button to move to the stored satellite position.
yTo recalculate the satellite positions, move to the corresponding row and press OK button.
yPress the RED button on the remote control to save the current settings.
9.2.3USALS
ySelect USALS in Positioner Setup and press OK.
ySelect an active transponder using f button.
ySet your Longitude using 0~9 buttons and specify East/West using e/f buttons.
ySet your Latitude using
yMove to ‘Go to Satellite’ and press OK button to move the motor to the satellite position.
yTo move the motor to the center (0) position, move the cursor to the ‘Go to Reference’ row and press OK.
yPress the RED button to save the current setting.
23