14.16 Power Search
Enables the receiver while in “STANDBY MODE” to rescan satellite details in order to add or adjust Transponder Frequency data and individual channel data. This is extremely useful if the various satellites make regular changes to data. Ie ASTRA 28.2; ASTRA 19.2; HOTBIRD 13.
yIn the “SYSTEM SETTING” Menu.
yGo to “OTHER SETTING” press OK.
yGo to “POWER SEARCH MODE” press e/f buttons to switch on.
ySelect the satellite(s) to be reviewed by pressing OK.
yNext while on the particular satellite press e/f buttons.
yYou now have the option to adjust the type of scan to complete.
yAfter you have selected the type of scan press the RED button to “SAVE” the settings.
yNow use the Back ( 
) button to go out of the menu and back to “OTHER SETTING”. Note: POWER SEARCH starts 1minute after going into standby and there is a slight delay in turning on (2seconds) if receiver is in the middle of scanning satellites. Additionally if you have a motorized system the receiver will move the motor when in “STANDBY” with the POWER SEARCH setting ON.
14.17 PVR Function
14.17.1 Recording File
To see a list of the recorded files, push USB button and select recorded file or push Play button in live mode.
•To select file using ▲/▼, OK buttons or Mosaic ( 
) buttons.
•Play ( 
) button: To play selected file.
•Green button: To edit selected file.(Play, Rename, Delete, Lock, Unlock)
14.17.2 Recording
•To press REC ( 
) button on the RCU and begin recording.
•The recording will be stored on the External memory and will be shown on the "Recoding File".
•If you push “REC button” one more time, there will be menu for recording duration.
-You can change the duration of recording time by using the e/fbuttons or numeric buttons.
•While recording a program, you can’t change other channel.
•Default recording time is 2hours.
41