About Your Terk TV1

TV1

Thank you for choosing the TERK TV1. TERK antennas are designed to help deliver sharp, clear video reception. Our engineering department is dedicated to designing antennas that enhance both the latest technology and the aesthetics of any viewing environment. The TV1 installs in minutes, is easy to use and simple to adjust. Before using your antenna, please remove all parts from the box and read this owner’s manual carefully.

Flexible Design for Any Situation

The TV1 is great as a primary antenna or as a reliable back-up in the event of a cable or satellite outage.

A UHF loop antenna is included to ensure reception of all off-air TV signals, and the 300/75 ohm transformer ensures compatibility with any television set.

TV1

Making Connections

With Your New TV1

Simply use the diagram below that matches the rear of your television set:

Connect the VHF and UHF antenna leads to the matching VHF and UHF screw terminals on the TV. See Fig. 1.

Connect the VHF antenna cable into the 300/75 ohm matching transformer (included) and insert the transformer into the VHF connection on the TV. Connect the UHF loop directly to the matching screw terminals on the TV. See Fig. 2.

Connect the VHF antenna cable into the 300/75 ohm matching transformer (included) and insert the transformer into the VHF connection on the TV. See Fig. 3.

TV1

Locating Your TV1

For Best Results

Your TV1 is a precision instrument and should be placed in a location that is best for receiving TV signals. It can be placed on top of any standard TV for

ease of adjustment.

Helpful Information

About Your TV1

The TV1 can be used with the weighted non-skid base or mounted directly to most TVs. See Fig. 4 and 5.

1	2 Fig. 1Fig. 2Fig. 3

Fig. 4

Fig. 5

TV1