Mitsubishi Electronics CP9800DW operation manual Error Messages And Countermeasures, Contents

Models: CP9800DW

1 27
Download 27 pages 1.94 Kb
Page 21
Image 21
ERROR MESSAGES AND COUNTERMEASURES

ERROR MESSAGES AND COUNTERMEASURES

INDICATIONS ON THE FRONT PANEL AND COUNTERMEASURES

2If, for some reason, printing is not possible or an error occurs during printing, the indicators on the front panel will illuminate or blink. In this case, follow the procedure described below.

In case of an error during printing, unless you turn off the unit, the unit resumes printing automatically when the error is corrected.

 

 

: Steady on

: Off

: Blinking

 

: Depends on the previous condition

 

 

 

 

 

 

 

 

ALARM

PAPER/

DATA READY COOLING

Causes and Countermeasures

Page

INK RIBBON

 

 

 

 

 

 

 

 

 

 

The door is open.

 

 

7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Close the door.

 

 

 

 

 

 

 

 

A paper jam occurs.

19

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Refer to “Overcoming paper jams.”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The power is turned off during printing process.

---

 

 

 

 

 

 

 

• Turn on the power and carry out the paper feed & cut.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The temperature of the thermal head is too high.

7

 

 

 

 

 

 

 

• Wait until the indication goes off. * Note

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The ink ribbon is not loaded.

 

 

 

 

 

 

 

 

The ink ribbon is used up.

14-15

 

 

 

 

 

 

 

The ink ribbon which is not available to this printer is

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

installed.

 

 

 

 

 

 

 

 

• Replace the ink ribbon with a new one.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The print paper is not installed.

11-12

 

 

 

 

 

 

 

The print paper is used up.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Install new print paper.

 

 

 

 

 

 

 

 

The actual combination of ink ribbon and print paper is

 

 

 

 

 

 

 

 

inconsistent with the setting made by the personal

11-15

 

 

 

 

 

 

 

computer.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Set the personal computer according to the actual

 

 

 

 

 

 

 

 

combination of ink ribbon and print paper.

 

 

 

 

 

 

 

 

Turn off the printer, then adjust the setting of the

 

 

 

 

 

 

 

 

personal computer to the actual combinatin of ink

 

 

 

 

 

 

 

 

ribbon and print paper.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Other errors

20

 

 

 

 

 

 

 

PRECAUTIONS

FEATURES

 

CONNECTIONS

PREPARATION

SHOOTING

TROUBLE-

 

OTHERS

 

 

When ALARM or PAPER/INK RIBBON indicator illuminates or blinks, open the door and carry out the above countermeasures.

If the indicator is not turned off by closing the door, carry out the paper feed & cut.

*Note

If an error occurs while the continuous printing through the PC is ongoing, it is resumed after the COOLING indicator

 

goes off.

CONTENTS

18

Page 21
Image 21
Mitsubishi Electronics CP9800DW Error Messages And Countermeasures, Indications On The Front Panel And Countermeasures