
FIRST INSTALLATION
Note:
If the receiver is already connected to a satellite reception system and/or a
You can change between the operation modes using the buttons. Make the “Yes” or “No” settings using the buttons. Press the ! (green) button to open the next menu:
Select the required setting for your LNB control using the buttons (only on connection of the receiver to a satellite reception system). The following options are available:
-DiSEqC™1.0
-One cable (automatic or manual setting)
-No LNB power (if your LNB has a dedicated power supply)
-No DiSEqC™
-Toneburst
Continue the first installation with the related section.
14