EPG (ELECTRONIC PROGRAM GUIDE)
You can use the cursor buttons ( ) or the number pad buttons to select the desired channel and, if available, you can use the button to open further information on the desired program. The button allows you to look ahead in 15 minute steps to future programs on the channels (press the button to return to the current time).
If you wish to view the program currently being shown on a channel, you need not to exit the EPG, just select the desired channel and press the button. At the top right of the screen you will see the
current TV picture for the selected channel. The picture only appears once the button has been pressed. What you saw before was the picture of the old channel that had previously been selected, even though the EPG was no longer set to that channel.
“PREVIEW” VIEW (PROGRAM MAGAZINE)
The “Preview” view (program magazine) can be opened at any time in EPG by pressing the " (yellow) button.
Also note the bars at the bottom of the
In the “Preview” view you will see all the programs that will be shown on the channel previously selected in the “Current”. Provided that EPG data has been supplied by the channel provider, the receiver shows the programs that will be shown on the selected channel for several days in advance.
You can use the cursor buttons ( ) to select the desired program and, if available, you can use the button to open further information on the desired program.
You can use the buttons to scroll through the programs in the order of the overall list of programs (the programs can also be selected by entering digits with the number pad); you remain however in “Preview” view.
The & button allows you to scroll backwards and forwards a day at a time.
Usingsection)the. (red dot) button you can load the selected program into the recording settings (see “Recording”
35